Chapter 2. Installing and Set Up
2-2
Parts Name and Function
(
Front View
)
(
Rear View
)
(Internal View)
№
Name
Function
①
Open Lever
When open the Front Cover, hold this lever.
②
Printer Status Lamps
Printer status display lamps are located on the panel.
③
Front Cover
Open the Front Cover when replacing an ink ribbon or paper, or
when performing maintenance.
④
Dust Box
The Dust Box stacks trim dusts.
⑤
Power Switch
This switch turns on/off the power of the printer. When the “|”
marked side of the switch is pressed, the power is turned on.
When the “○” marked side of the switch is pressed, the power is
turned off.
<Caution> Once the printer is turned off, wait at least 3 seconds
before turning it on again.
⑥
Power Connector
To be used to connect the power cable.
⑦
USB Connector
To be used to connect the USB cable.
⑧
Paper Setting Lamp
When setting the paper, insert the paper until the lamp is lit.
When the lamp blinks, remove the paper until the lamp goes off.
②
③
①
⑤
⑥
⑦
⑧
④
