Chapter 2. Installing and Set Up
2-5
Installing Clean Roller.
1.
Pull the upper unit open lever to open the
upper unit.
2.
Take off the ribbon cassette, then remove the
protection sheet.
3. Check that the cleaning roller is
installed.
（
direction of the cleaning roller
）
4. Close the upper unit.
Caution: Keep holding the upper unit
until the upper unit is fixed.
Pull the upper unit open lever and slowly
move it upward to open the upper unit.
If it is not settled, please push the cleaning
roller lightly into the place shown in the
following figure until you hear a click to
confirm it is settled.
Protection
sheet
Left
Left
Left
Left
Right
Right
Right
Right
