SineDigital,Inc.
Installation Guide for MW-1500AP(H)
Entire contents 2003
SineDigital,Inc
.
All rights reserved
Page 6
MW-1500AP(H) Specification
Hardware Specification
- Ports: 1 x RJ-45 (WAN, Ethernet, 10/100 Base-T type)
1 x DB-9 (COM, console port)
1 x power connector
- Displays: 5 x status LED's
- Antenna: 2 x external 4dBi dipole (provision for antenna replacement)
- Power switch
- Init. switch (reset to factory default)
- Size: 146 x 186 x 41 mm
- Weight: 405g
- Temperature: -20 ~ 70
o
C (storage)
-10
~
55
o
C (operation)
- Relative humidity: 0 ~ 95% non-condensing
- Power supply: 5V DC/2A
- Power consumption: max. 1.3A/5V DC
Software Specification
- IEEE 802.1d wired LAN to wireless LAN bridging
- Wired LAN standard: IEEE 802.3&3u (Ethernet, 10/100 Mbps)
- Works with ADSL (PPPoE), Cable modem and leased line
- Fixed IP, DHCP server, DHCP client, DHCP relay, etc.
- Roaming via IAPP
- Remote management via HTTP (Web Manager) and Telnet
- Security: static 64/128-bit WEP encryption
- IEEE 802.1x
- RADIUS authentication and accounting
- SNMP v1, v2c & MIB I, II, 802.11MIB
- Firmware upgrade function via TFTP or HTTP
- IP sharing via NAT
- Auto channel selection
- Load Balancing
- NetBIOS Filtering
- Broadcast Storming Control
Radio Specification
- Wireless LAN standard: IEEE 802.11b
- Frequency: 2.4GHz ISM band
- Modulation: Direct Sequence Spread Spectrum (DBPSK, DQPSK, CCK)
- Data rate: 1M, 2M, 5.5M, 11Mbps with auto fall-back
- 802.11b power save
- Receive sensitivity: min. -84dBm at 11Mbps
- Output power: typical 17dBm
