Sinclair S-THERM GSH-100ERB, Service And Installation Manual, Page: 61 / 153

Control
Page 54 Total 145
a window will pop up, saying “
Please turn off the system first!
”.
● “
Floor debug
”, “
Disinfection
”, and“
Holiday mode
” cannot be activated at the same with this
function. When doing so, a window will pop up, saying “
Please disable the emergen. mode!
”.
● Upon power failure, “ Emergen. mode” will back to “
Off
”.
3.2.2.13 Holiday Mode
[Operation Instructions]
★
At the function setting page, select “
Holiday mode
” and set it to “On” or “Off”.
[Notes]
● This function can be activated only when the unit has been turned off, otherwise a prompt dialog box
will pop up, saying “
Please turn off the system frist!
”.
●When “
Holiday mode
” has been activated, the operation mode will automatically switch to “
Heat
”.
Mode setting and “
On/Off " operation through the controller will be unavailable.
●When “
Holiday mode
” has been activated, the controller will automatically deactivate the “
Weekly
timer
” and “
Preset mode
”and “
Clock timer
” and “T
emp.timer
”.
● Under the “
Holiday mode
”, when the unit is under the control of room temperature, the set point
(room temperature for heating) should be set to 10°C; when it is under the control of leaving water
temperature, the set point (leaving water temperature for heating) should be 30°C.
● When this function has been activated, “
Floor debug
”, “
Emergen.mode
”, “
Disinfection
”, “
Manual
defrost” , “
Preset mode
”, “
Weekly timer
”, “
Clock timer
”, and “ Temp.timer”
cannot be activated at
the same time, meanwhile a window will pop up, saying “
Please disable the holiday mode!
”.
●This function will be memorized upon power failure.