Registered trademarks of General Dynamics Ordnance and Tactical Systems-Canada Inc. are denoted by
®
.
www.simunition.com
Page 8 of 36
© 2019 GD-OTS Canada
8971965.FTSIM_rev12
FX
®
9003 Protective Mask
Cleaning instruction for the
FX
®
9003 Protective Mask
For use in FX
®
interactive training with 9mm, .38 cal. or 5.56mm Simunition
®
FX
®
Marking cartridges only.
DO NOT USE WITH ANY OTHER TYPE OR CALIBER OF AMMUNITION.
FX
®
9003 Protective Mask
The
FX
®
9003 Protective Mask
can be equipped with three (3) different lens models: Single lens and Double lens with
Open Cell Foam and Single lens with Close Cell Foam. Lens configuration and Foam type can easily be identified by specific
characteristics featured on the front of the
FX
®
9003 Protective Mask.
Please refer to pictures on page 9 to see every
possible lens configuration.
Open Cell Foam material characteristics
The Open Cell Foam material has a matte finish and micro bubble open cells are visible on the surface of foam
(see Fig. 21a and 24a). This type of foam can absorb a large quantity of liquid when immersed.
Close Cell Foam material characteristics
The Close Cell foam material has smooth and soft finish without any micro bubble cell visible on the surface (see Fig 27a).
This type of foam is categorized as a self-skinning foam and provides comfort and durability. When immersed, the Close
Cell Foam material does not absorb or trap any liquid and/or bacteria
.