Registered trademarks of General Dynamics Ordnance and Tactical Systems-Canada Inc. are denoted by
®
.
www.simunition.com
Page 4 of 36
© 2019 GD-OTS Canada
8971965.FTSIM_rev12
Donning the FX
®
9003 Protective Mask
1.
Open the back flap by separating the Velcro
®
.
2.
Hold both ends of the back flap with your hands and place your
chin first into the mask (see Fig. 4). Put the mask over your
head. Ensure that the top mesh material is well adjusted to your
head. Ensure that your nose bridge is well adjusted with the
nose receptacle of your goggles.
Fig. 4 – Place your chin first into the mask FX
®
9003
3.
Attach both ends of the back flap Velcro
®
fastening by overlapping the Velcro
®
hook and loop attachment (see
Fig. 5 and 5a). Ensure that your mask's back flap is tight, in order to get a good foam seal around the nose bridge
and face, this will help prevent fogging.
Fig. 5 – Attach both ends of your Mask's back flap Velcro
®
fastening by overlapping the Velcro
®
Fig. 5a – Hook and loop attachment of your FX
®
9003
Protective Mask
4.
Then, make sure that the textile cover (front & sides) is properly
adjusted over your shoulders (see Fig. 6).
Fig. 6 – Adjusting the mask’s textile
Note:
The
FX
®
9003 Protective Mask
must be worn with FX
®
Throat (8971764) and FX
®
groin protector (male 8971770 or
female 8971771) and FX
®
9000 Groin Protection Gen 2 (male 8971774 and female 8971778). These items are not included
with the
FX
®
9003 Protective Mask
.