Simu LiveIn Installation And Use Instructions Manual Download Page 6

Page: 6 / 65

Overview

LiveIn is a connected solution providing local and remote control of SIMU-Hz radio

equipment from a smartphone or tablet.

The LiveIn solution comprises :

- A WiFi/Simu-Hz connected plug to be inserted into a mains socket to operate installed

Simu-Hz equipment. The LiveIn plug must be installed close to the WiFi router and at the

centre of the Simu-Hz equipment (refer to the list of compatible equipements on

simu.com).

- A free downloadable multi-lingual application compatible with iOS and Android

smartphones.

The solution is used to connect:

- Up to 5 LiveIn plugs

- Several Smartphones/tablet (unlimited number)

Each LiveIn plug allows:

- Direct control of 25 pieces or groups of equipment with your mobile

- Starting customised scenarios manually (25 possible scenarios)

- Starting scenarios automatically with 25 possible time clocks.

2. Introduction to LiveIn

Summary of Contents for LiveIn


































































Search results

Summary of Contents for LiveIn

Reviews:

Related manuals for LiveIn

Brands by name

Popular brands

Simu LiveIn, Installation And Use Instructions Manual

Search results

Summary of Contents for LiveIn

Reviews:

Related manuals for LiveIn

Brands by name

Popular brands