2200 PRO
2200 PRO
8.1 Wind
- If no wind speed is indicated when the anemometer is
turning (Fig. 24) or if the wind error screen (Fig. 25) appears when the
anemometer is turning:
-Check the connection and wiring to the anemometer.
-Check the wind sensor with a audible continuity meter. The
meter will beep each time the anemometer turns.
8.2 Sun
- If no sun value is displayed (Fig. 26)
-Check wiring to sun sensor. Possible broken connection.
-Test with new sun sensor.
-If sun value reads 60 (Fig. 27)
-Check wiring to sensor. Possible short.
-Test with new sensor.
8.3 Temperature
- If no temperature value is displayed (Fig. 28)
-Check wiring to sensor.
-Measured value may exceed range limit.
-Test with new temperature sensor.
Klx
mph
Fig. 24
Fig. 25
Klx
mph
Klx
mph
Fig. 26
Fig. 27
F
mph
Fig. 28
8.4 General Trouble Shooting
-No display on LCD screen
Check 120VAC to terminals L and N
-Motor does not move but can relays click and up and down arrows blink by using face plate
Buttons in manual mode.
Confirm jumper between L and 17
Check fuse
-No reaction from face plate switches in manual mode.
Check for blinking up arrow and blinking icon of higher priority function in lower bar such
as wind, rain, i1 or i2.
-Does not move in or out automatically with the sun light
Confirm 2200 is in automatic mode
Check for blinking up arrow and icon of higher priority such as wind, rain, i1 or i2
2200 PRO
2200 PRO
Klx
mph
11
