409977/B
55
b
From the information provided by the personnel installing the motion sensor,
obtain the relevant rotation information.
c
Make sure that the correct offset values have been inserted.
d
Make sure that the correct installation angles have been inserted.
e
Record the information in the result table.
Note
The Kongsberg Seapath
®
- and other GPS systems - allow you to define the MRU
location in the positioning system. If this is done, the MRU offset values in the SU90
must be set to 0 (zero) to avoid "dual compensation". The rotation information is
normally not recorded by the positioning system, and must therefore be defined
in the SU90.
5
Select
Cancel
to close the dialog box without making any changes.
Result
Motion reference unit (MRU) offsets
X offset
Y offset
Z offset
Installation angle X
Installation angle Y
Installation angle Z
Requirements
Results
All offset values and installation angles are entered in the SU90.
All values are correct.
All values are recorded in the relevant table.
Date and signature:
Summary of Contents for SU90
Page 61: ......
Page 62: ...2020 Kongsberg Maritime...
