Adjusting the maximum rudder angle
Select
Max starboard
and press the
Menu/Enter
key to start the calibration
Manually turn the rudder to h.o. starboard position
Confirm that the actual rudder angle is identical to
the readout. Adjust the reading if necessary
Repeat the procedure for port rudder angle
Setting rudder zero position
This adjustment should be made in calm sea and side
forces from wind or current should be avoided.
Bring the boat up to cruising speed, and head
directly into the wind
If the boat has twin engines, synchronize the
engine RPM’s
Set the trim tabs and stabilizers to have no effect
on the boats heading
Steer the boat manually on a steady course
Select
Set rudder 0
and press
the Menu/Enter key to confirm
Confirm the rudder zero
position
1
2
3
4
1
2
3
4
5
6
Summary of Contents for IS20 Combi
