Starting the race timer
The race timer will continue to run until the Stop softkey
is pressed even if the race timer page is replaced by
another page!
When the counter turns zero, the
race log starts to log the distance,
the
Synchronize
softkey is
removed and the timer function will
work as a race timer!
Stopping and restarting the timer
Stop the timer by pressing the
Stop
softkey.
The timer will stop counting, and the softkeys will
change status
Restart the race timer from the stopped time by pressing
the
Start
softkey.
The race timer and race log can be stopped when
counting down or counting up!
-
Summary of Contents for IS20 Combi
