Simrad ES 18 - DATASHEET REV C, Installation Manual

Page: 31 / 88

404770/B
29
Unpacking the transducer from its transport
crate
The ES18 transducer is shipped in a wooden box. Prior to installation, the transducer
must be unpacked from its box, and placed under the mounting location.
Prerequisites
You must be equipped with a standard set of tools. This tool set must comprise the
normal tools for mechanical tasks. Each tool must be provided in various sizes. We
recommend that all tools are demagnetized to protect your equipment. The following
specific tools and items are required for this task:
• Adjustable spanner (Wrench)
• Crowbar
• Hammer
• Protective mat (for the transducer face)
• Ropes and tackles
• Transportation cart
Context
A transducer must always be handled as a delicate instrument. Incorrect actions may
damage the transducer beyond repair. Observe these transducer handling rules:
•
Do not
activate the transducer when it is out of the water.
• Do not handle the transducer roughly. Avoid impacts.
• Do not expose the transducer to direct sunlight or excessive heat.
•
Do not
use high-pressure water, sandblasting, metal tools or strong solvents to clean
the transducer face.
• Do not damage the outer protective skin of the transducer face.
• Do not lift the transducer by the cable.
• Do not step on the transducer cable.
• Do not damage the transducer cable, and avoid exposure to sharp objects.
Procedure
1 Prepare a cart or any other type of suitable transport vehicle.
2 Place a protective mat on the cart to safeguard the transducer face.
Installing the transducer