Simrad ES 18 - DATASHEET REV C, Installation Manual

Page: 27 / 88

404770/B
25
Installing the cable gland
In order to secure the vessel’s watertight integrity, it is extremely important that the
transducer cable penetrates the ship’s hull in a safe manner. One suggested method is
to use a cable gland. The cable gland consists of a bushing, rubber gasket, washers
and a packing nipple.
Prerequisites
Before you can install bushing, the following prerequisites must be met:
• The transducer cable must be fitted with the rubber gasket, washers and packing
nipple.
• The installation arrangement has been approved by the relevant authority.
• All relevant personnel (skilled shipyard workers, ships electricians) and relevant
tools must be available.
Context
These items are all provided as a part of the transducer delivery.
A Bushing, penetrates the hull plating
B
Washers
C
Rubber gasket
D Packing nipple
Procedure
1 Depending on the chosen installation method (blister or tank), make a hole for
the bushing.
2 Weld the bushing to the steel plate.
3 Verify the quality of the weld.
4 If relevant, allow the maritime authority and/or classification society to inspect and
approve the installation.
Installing the transducer