Simrad 000-15567-001, Instruction Manual

Page: 60 / 114

Simrad GC80/GC85 Compact Gyro Compass
52
20221511 / D
Setting the Latitude input source
When the system is configured as described in
Configuring the
gyro system
page 50 onwards, the latitude input source can be
changed as described below.
1
Press the
DISP
button until the display shows latitude
value.
2
Press
SET
button once, and the upper line in the display
starts flashing.
3
Use the arrow buttons for selecting
Gyro
or
GPS
as the
latitude input source, and confirm the entry with the
ACK/ENT
button.
- If
Gyro
is selected, the display will change to flashing
numbers
- If
GPS
is selected, the display will show the latitude value
read from the GPS
4
When
Gyro
is selected and the numbers are flashing, press
the arrow buttons for increasing/decreasing the latitude
value, and confirm the entry with the
ACK/ENT
button.
- This entered latitude value will now be used, together
with speed and bearing information, for calculating the
vessel’s current latitude.
5
The display will return to show latitude value without
flashing.