Step 1 - FITTING AND POSITIONING WALL CHANNEL
3
Step 2
Remove the wall channel from the glass panel frame. Place the wall channel
in position on the tray (10 - 15mm in from the outer edge of the tray), use a
spirit level to ensure it is vertical and mark all 3 fixing holes onto the wall.
Drill holes in the positions marked using a 6mm masonry drill bit. Insert wall
plugs (B) into all of the holes (beyond the thickness of the tile).
Fix the wall channel to the wall using 3 screws (A).
Note: Inject silicone sealant into the holes before inserting the screws to
seal the holes.
Push the glass panel on to the wall channel.
B
A
REFER TO PAGE ONE FOR YOUR CHOICE
OF INSTALLATION - LEFT OR RIGHT!
B
