Simpson S663, Operation Manual, Page: 17 / 39

16
3.4 What the Keys Do in the Programming Mode
Key Keypad behavior
Press and hold for four seconds to exit the
programming mode.
S
or
T
The up and down keys navigate through the
available menu functions. The menu ‘wraps
around’ when the bottom or top of the menu is
reached.
1) Enter the current menu or parameter to
view/edit.
2) Write the change to the counter memory and
move to the next function.
RESET
ENTER
Setup Menu Function Menu Option Menu
CHPASS 000
INPUT
SETUP
COUNT SETUP
END
A CHAN UP
B CHAN DOWN
000
up
down
quad
rquad
up
dir
down
other setup menus
Return to
Display Mode
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
Figure 17. Programming Menu Structure
In the Programming Mode, the S663 will return to Display Mode automatically if a key is not
pressed within 120 seconds (2 minutes). The menu is comprised of three levels: Setup Menu,
Function Menu and Option Menu. Figure 17 illustrates the three levels of the menu system.
Password Entry Entry (Pass) and changing of the password (Chpass) are similar to editing a
numerical parameter. See Numerical Value below. If the password has been
set to a value other than “000,” entry of the proper password is required to ac-
cess the remainder of the menu.
www. .com
information@itm.com 1.800.561.8187