Simpson Strong-Tie QUIK DRIVE QDHSD60 Operating Instructions Manual Download Page 4

800-999-5099             www.strongtie.com

READ AND FOLLOW ALL INSTRUCTIONS
WHEN SERVICING USE ONLY IDENTICAL QUIK DRIVE

®

 REPLACEMENT PARTS.

ATTENTION - Please see screwgun manufacturer’s instructions for safe use of electric power tools.

CHANGING NON-SKID TEETH

 On models with removable non-skid teeth, the nibs can 

be reversed to protect some surfaces. 

(1)

 Insert a screw in the hole at top of nosepiece 

and pry the nibs off. Replace by sliding onto front of nosepiece 

(2)

 and pressing against 

a hard surface

 (3a - 3b)

.

CHANGING THE HEX MANDREL

 On QDPROHX14,

QDPROHX516, and QDPROHX516XL models, the
mandrel must be removed from the front nose.

(1)

 Remove retaining clip and washer 

(2)

 Slide

mandrel through front.

Quik Drive

®

 PRO Attachments and Systems

are covered by one or more of the following patents.

LIMITED LIFETIME WARRANTY

This Limited Lifetime Warranty applies to all Simpson Strong-Tie Quik Drive products and must be read in conjunction with the General Notes, Terms 
and Conditions of Sale, and Corrosion Resistance information contained in the current Quik Drive Auto-Feed Screw Driving System catalog and at 
www.strongtie.com/info, along with any information provided with a Simpson Strong-Tie product. Screwdriver motors and batteries that may be 
supplied with the Products are manufactured by others and are warrantied by their respective manufacturers. Simpson Strong-Tie Company Inc., 
hereinafter (“Simpson Strong-Tie”), warrants the Products to the original purchaser to be free from substantial defects in material, manufacturing, 
and design for the lifetime of the product, if properly stored, maintained and used. This Warranty does not cover normal wear and tear or any 
Product that was: (1) purchased other than from an authorized Simpson Strong-Tie dealer, retailer or distributor; (2) modified or altered; (3) used 
with any fasteners other than authentic Quik Drive

®

 fasteners; (4) improperly serviced; or (5) subject to negligence, excessive uses, or any use not in 

accordance with the printed materials provided with the Product as determined by Simpson Strong-Tie. Purchaser’s sole remedies are replacement 
or repair upon return to Simpson Strong-Tie with proof of purchase (shipping prepaid by purchaser). To obtain warranty service go to www.strongtie.
com or contact Simpson promptly at (800) 999-5099. The repaired or replaced Product is warranted under the terms of this Warranty.

WHERE LAWFUL, SIMPSON STRONG-TIE DISCLAIMS ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL SIMPSON BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, 
PUNITIVE OR SPECIAL DAMAGES OR DIRECT OR INDIRECT LOSS OF ANY KIND, INCLUDING BUT NOT LIMITED TO PROPERTY DAMAGE AND 
PERSONAL INJURY. ENTIRE LIABILITY OF SIMPSON STRONG-TIE IS LIMITED TO THE PURCHASE PRICE OF THIS PRODUCT. SOME STATES DO 
NOT ALLOW LIMITATIONS ON IMPLIED WARRANTIES, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO 
THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND 
YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.

1

2

3a

3b

1

2

6425306, 6439085, 6601480, 6941847

Summary of Contents for QUIK DRIVE QDHSD60













Reviews: