Simpro Dumpmaster, User Manual

Page: 50 / 60

7.4 Annual inspection
The following inspection should be carried out every 12 months, and the results recorded in
the log on the following page.
Annual Inspection Checklist
Category No. Item Check
General 1 Entire machine
Conduct a complete tipping cycle and check for
any faults or abnormal behaviour.
Hydraulic
systems
2 Hydraulic ram Check there are no oil leaks.
3 Oil reservoir
Drain and replace the hydraulic fluid, in accordance
with the specifications in
Section 5.7.4 .
Clean the intake suction-filter.
4
Lowering
valve
Remove and clean.
Electrical
systems
5
Mains power
lead (if fitted)
Check that the lead is in good condition.
Safety systems 6
Door interlock
actuator
Check that the actuator is securely attached to the
door with security screws, and enters the interlock
freely and smoothly, without force.
Check that the actuator locks the door while the
cradle is raised above 100mm.
Mechanical
systems
7 Lifting chains
Check the length and condition of the lifting chains.
If the length is outside the allowable tolerance, or
there are signs of corrosion or wear, they should be
replaced.
Lightly lubricate with silicone spray.
8 Ram rollers Lightly lubricate with silicone spray.
9 Follower rollers Lightly lubricate with silicone spray.
10 Inside masts Lightly lubricate with silicone spray.
11
Roller pivot
arm(s)
Lightly lubricate with silicone spray.
12 Door hinges Lightly lubricate with silicone spray.
13 Cradle axle Lightly lubricate with silicone spray.
14
Castor wheels
(if fitted) Check that the castor wheels are running smoothly
and the brakes working correctly.