Simpro Dumpmaster, User Manual

Page: 25 / 60

User Manual | Simpro Dumpmaster®
Original Instructions | English | v59.0 | December 2019 | Page
24
4.3.2 Standard Control Panel
How to operate the controls of a standard
machine, with no autocycle function or PLC
controller.
1. Before operation, check that the machine is
stable and safe to use as per
Section 4.1 .
2. Open the door and place the full bin onto the cradle, taking care that it is properly
positioned as per
Section 4.2 , then shut the door.
3. Press and hold the RAISE button until the bin reaches the inverted position, then
release. Wait for the contents of the bin to empty.
4. Press and hold the LOWER button until the cradle rests on the ground.
5. Open the door and remove the empty bin as per Section 4.2 .
6. Repeat from step 1) as required.
Release the RAISE or LOWER button to stop the cradle at any time.
4.3.3 Autocycle Control Panel
How to operate the controls of a machine with
an autocycle function, allowing bins to be
emptied without continuous operator input.
Dumpmaster models that are fitted with an
autocycle control system
may be used in either ‘Manual’ or
‘Automatic’ mode, selected using a switch on the control panel.
The operating procedure for each mode is as follows:
4.3.3.1 Automatic mode
1. Before operation, check that the machine is stable and safe to use as per Section 4.1 .
2. Open the door and place the full bin onto the cradle, taking care that it is properly
positioned as per
Section 4.2 , then shut the door.
3. Turn the mode-selector switch to AUTO.
4. Press the RAISE button once . The cradle will automatically lift, hold the bin inverted for
a short time, and return to ground level.
5. Open the door and remove the empty bin as per Section 4.2 .
6. Repeat from step 1) as required.
Press the EMERGENCY STOP button at any time to stop the cradle.
4.3.3.2 Manual mode
1. Before operation, check that the machine is stable and safe to use as per Section 4.1 .
2. Open the door and place the full bin onto the cradle, taking care that it is properly
positioned as per
Section 4.2 , then shut the door.
3. Turn the mode-selector switch to MANUAL.
4. Press and hold the RAISE button until the bin reaches the inverted position, then
release. Wait for the contents of the bin to empty.
5. Press and hold the LOWER button until the cradle returns to the ground.