Simpro DUMPMASTER DM0700, User Manual

Page: 40 / 60

3.10.4 Annual inspection
The following inspection should be carried out every 12 months, and the results recorded in
the log on the following page.
Annual Inspection Checklist
Category No. Item Check
General 1 Entire machine
Conduct a complete tipping cycle and check
for any faults or abnormal behaviour.
Hydraulic
systems
2
Hydraulic ram
Ram seal 0090090006
Check there are no oil leaks.
3 Oil reservoir
Drain and replace the hydraulic fluid in
accordance with
§3.7.4 .
Clean the intake suction-filter.
4
Lowering valve
Coil 0250090067
Cartridge 0250090055
Remove and clean.
Electrical
systems
5
Power lead (if
fitted)
Check that the lead is in good condition.
Safety systems
6
Door interlock
actuator
0250050065
Check that the actuator is securely attached to
the door with security screws, and enters the
interlock freely and smoothly, without force.
Check that the actuator locks the door while
the cradle is raised above 100mm.
7
Safety labels and
markings Check that all warnings labels, guides etc are
attached and clearly legible.
Mechanical
systems
8 Lifting chains
Check the length and condition of the lifting
chains. If the length is outside the allowable
tolerance, or there are signs of corrosion or
wear, they should be replaced.
Lightly lubricate with silicone spray.
9
Ram rollers
0140120002
Lightly lubricate with silicone spray.
10
Follower rollers
0090120000
Lightly lubricate with silicone spray.
11 Inside masts Lightly lubricate with silicone spray.
12
Roller arm(s)
Single 0640200005
Double 0640200003
Lightly lubricate with silicone spray.
13 Door hinges Lightly lubricate with silicone spray.
14
Cradle axle
0000000002
Lightly lubricate with silicone spray.
15
Castor wheels
Braked 0250040076
Unbraked 0250040072
Check that the castor wheels are running
smoothly and the brakes working correctly.