Getting Started
DKIT-02 Lamp Starter Kit
4 Simply Automated, Incorporated
6108 Avenida Encinas, Suite B, Carlsbad, CA 92011 USA
Technical Support:
www.simply-automated.com
or
800-630-9234
452-0002-1001 Rev. D Revised: September 13, 2011
Helpful Hint: The Tabletop Controller can inadvertently be placed in the program mode by tapping button 1 five
times. The indicator above button 1 will continuously blink green for five minutes. To exit the programming
mode, quickly tap any Tabletop Controller button two times.
Button 2
. You can repeat the process outlined above for button 2. Button 2 is programmed from the factory to
turn on lamp module #5 at a 100% dim level. To change the dimming level for button 2:
•
Go to the Tabletop Controller, press button 2 to activate the scene (lamp should be on). Next, press and
hold button 2, dimming down to the desired dim level for lamp module #5.
•
On the Tabletop Controller, press (quickly tap) button 2 seven times. The lamp will flash off and back on
indicating the new level was stored correctly. You have created a new scene by re-programming button 2
from the factory pre-set dimming level.
Editing buttons 3 or 4
. Button 3 is programmed to turn on both lamp modules at 100%. Button 4 is
programmed to turn off both lamp modules. We recommend not editing these buttons since all devices (up to
ten or more dimmers/modules) in the Pre-Configured SimplySmart
Series have similar settings -- one tap of
button 3 turns all devices on, one tap of button 4 turns all devices off. This pre-programming is a very powerful
and convenient feature using both the Tabletop Controller with 4-buttons and Deluxe Dimmer with 4-buttons.
Examples include entering a home (button 3 for ALL ON), leaving a home (button 4 for ALL OFF), bedside for
security and nighttime convenience (button 3 for ALL ON or button 4 for ALL OFF).
Edit Button 3 so both Lamp Modules dim to the same level
. Button 3 is programmed from the factory to
turn on both lamp modules at a 100% dim level. To change the dimming level for both of the lamp modules
controlled by button 3:
•
Go to the Tabletop Controller, press button 3 to activate the scene (both lamps should be on). Next, press
and hold button 3 dimming down to the desired dim level for both of the lamp modules. If necessary, press
and hold button 3 a second time to dim up.
•
On the Tabletop Controller, press (quickly tap) button 3 seven times. Both lamps will flash off and back on
indicating the new level was stored correctly. You have created a new scene by re-programming button 3
from the factory pre-set dimming level.
Edit Button 4 so both Lamp Modules dim to the same level
. You can repeat the process outlined above for
button 4. Button 4 is programmed from the factory to turn off both lamps.
Edit Button 3 so each Lamp Module dims to a different level
. Button 3 is programmed from the factory to
turn on both lamp modules at a 100% dim level. To change the dimming level for each of the lamp modules
controlled by button 3:
•
Go to the Tabletop Controller, press button 3 to activate the scene (both lamps should be on). Next, press
and hold button 1 dimming down lamp module #4 to the desired dim level. If necessary, press and hold
button 1 a second time to dim up.
•
On the Tabletop Controller, press and hold button 2 dimming down lamp module #5 to the desired dim
level. If necessary, press and hold button 2 a second time to dim up.
•
On the Tabletop Controller, press (quickly tap) button 3 seven times. Both lamps will flash off and back on
indicating the new level was stored correctly. You have created a new scene by re-programming button 3
from the factory pre-set dimming level.
Edit Button 4 so each Lamp Module dims to a different level
. You can repeat the process outlined above
for button 4. Button 4 is programmed from the factory to turn off both lamps.
