Chapter 6: Power supply maintenance
54
Procedure
1.
Identify the failed power supply.
2.
Disconnect the power cable from the power supply.
3.
Grasp the power supply handle (1) and the green release latch (2) and press the release latch
toward the handle as shown in the following figure.
4.
Gently pull the power supply from the slot.
Install a power supply
Before you begin
■ Obtain a replacement power supply of the same type and wattage.
■ Read the guidelines for protecting hardware from electrostatic discharge.
■ Read the guidelines for maintaining power supplies.
Procedure overview
You install a power supply to replace a failed or failing power supply.
Procedure
1.
Carefully remove the replacement power supply from its packaging.
2.
Orient the power supply so that the release latch is in the appropriate location.
3.
Slide the power supply into the empty slot until you hear the latch engage.
4.
Ensure that the power supply is fully inserted and locked in place by the spring-loaded clip.
5.
Connect and secure the power cable to the new power supply.
6.
Ensure that the power cables are fully inserted at both ends.
7.
Examine the LEDs and event messages to ensure the power supply is operational.