Citation - 52” & 61” Mower Decks
www.simplicitymfg.com
4
Tractor
Assembly
Ground Speed Control Lever Assembly
There is a LEFT-HAND and a RIGHT-HAND ground speed
control lever . When assembled to the control lever mount
(
E, Figure 4
), the control lever base (
F
) should be pointing
towards the rear of the machine as shown in Figure 4.
1. Remove the ground speed control lever and mounting
hardware from the handle bar box.
2. Install the ground speed control levers (
A
) onto the
control lever mount using the 5/16-18 x 3/4” bolts (
B
),
5/16” lock washers (
C
), and 5/16” flat washers (
D
).
Prior to tightening the bolts, align the levers with each
other (see Ground Speed Control Lever Adjustment).
Figure 4. Ground Speed Control Lever Installation
A. Ground Speed Control Lever
B. 5/16-18 x 3/4” Bolt(s)
C. 5/16” Lock Washer(s)
D. 5/16” Flat Washer(s)
E. Control
Lever
Mount
F. Control
Lever
Base
Figure 5. Install the Seat & Connect the Harness
A. 5/16-18” Nylock Flange Nuts
B. Seat Switch Harness Plug
C. Seat Switch
A
A
B
C
Seat Assembly
1. Unpack the seat.
2. Install the seat onto the seat mount plate and secure with
the 5/16-18” nylock flange nuts (
A, Figure 5
).
3. Connect the seat switch wire harness plug (
B
) to the seat
switch (
C
).
B
C
D
A
F
E
Not
for
Reproduction
