[ENTER] or enter [XX] to repeat the Annual program each year. See the ANNUAL REPEAT PROGRAMS
instructions in ADVANCED PROGRAMMING (Section 8.2) for details. The cursor will advance to the end date
line. Enter the end date in the same manner as the start date. If your Annual Plan is only for one day, do not
enter an end date. Just press [ENTER] to put “00” in the months and the display will advance to the next Annual
Plan.
Repeat the same procedure for Annual 01 as you did for Annual 00, or press [EXIT] to return to the time display.
6.4 CLEARING AN ANNUAL PLAN
To clear an Annual Plan, press the ANNUAL [A] key, then [ENTER]. The display will respond with:
Enter the Annual Plan number to be cleared and press [ENTER] twice. The display will show the contents of
that Annual Plan.
Enter 00 for the Start month and press [ENTER]. The plan will be cleared. There is no need to clear the end
date once the start date has been cleared. If you are programming the clock from a restart, the annual and basic
program entries will be cleared already.
6.5 CLEARING THE ANNUAL AND BASIC PROGRAMS
[C] [ENTER]
If you are re-programming a previously programmed clock you will need to erase any previous programs as they
could conflict with your new program. To clear all program entries, press the CLEAR [C] key. The display will
respond with:
Press [ENTER]. The display will respond with:
To clear the Annual program, press [A]. The display will return to the time display. To clear the Basic program
instead, press [B].
Choose a Basic Plan number to clear or press [A] to clear all Basic Plans.
20
Summary of Contents for 6500
