6
The TPS mounts onto the right side of an expansion box, and connects to the Power Distribution
Interface (PDI).
1. Slide the two tabs on the bottom of the TPS into the rightmost two slots on the expansion bay.
2. Push the TPS assembly against the back of the expansion bay.
a. Connect to the PDI, as shown below.
b. Three PDI headers, shown below, must be pushed through the three open slots in the back of
the TPS assembly.
c. Align the two screw holes at the top of the TPS assembly with the holes in the cabinet
backplane.
3. Use two #6 torx screws to secure the assembly to the expansion bay.
Figure 2. TPS Mounting
Mounting
Overview
Mounting Procedure
firealarmresources.com
