7.4
Direct Point Call-Up Screen Options
Figure 23 shows an example of the Direct Point Call-Up screen. The options available in the Direct Point Call-Up screen are listed in the
table below:
Figure 23: Direct Point Call-up Screen
Table 4: Screen options
Action
Description
Full Label
Shows the entire custom label on the line. Release the button to revert back to the standard
format.
Enable
Enables the selected point.
Disable
Disables the selected point.
Select Item
Displays point information on screen. “Enter” can also be pressed to display the point info to the
display.
Delete
Deletes a character from the prompt. When searching for a point, the screen will attempt to match
the point based on the keys pressed. Deleting a character will force an additional match attempt
based on the remaining characters.
CLR/Exit
Exits the screen. The CLR/Exit button on the entry keypad can also be used to exit the screen.
page 23
579-685 Rev. D
InfoAlarm Operator’s Manual 4100U, 4100ES, 4010ES
