7
With this type of station, pulling the T-handle down breaks the glass rod, located
just below the handle, and activates the alarm. Replace the glass rod as
described below.
1. Use a key to open the station.
2. Carefully clean any pieces of broken glass from the unit.
3. Position the rod in the slot located near the bottom of the station. See
Figure 5 for the location of the slot. Close the station and lock.
Figure 5. Replacing the Glass Rod
Replacing the Glass Pane/Glass Rod,
Continued
Replacing a Glass Rod
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
