Communicator
Page 6
Using the Guides
Read the rest of this chapter for information about the
Installation
Requirements, Unpacking the Card
and
Technical Support.
Then, read
the chapters as follows:
1. Refer to
Chapter 2
for an overview description of the kit
components.
2. Refer to
Chapter 3
for instructions on installing the card.
3. Refer to
Chapter 4
for further information on using the card,
e.g., inserting and removing the card.
4. Refer to the installation sheet for the communications software
provided or refer to the guide provided with your favorite
compatible communications software for instructions on
installation and start-up of the communications software.
5. With kits for PC compatibles, refer to the TEXT.WRI file on the
Modem Install Diskette for information on the modem AT
commands and S-Registers. The file may be opened and
printed with the Write accessory in Windows 3.x, Windows
NT or OS/2 Warp. For Windows 95, the text may be opened
and printed with the WordPad accessory. With kits for Apple
MacOS System 7, refer to the TEXT.PDF file on the diskettes
included with the kit. The file may be open and printed with
an Acrobat reader. (You may obtain an Acrobat reader from
the Adobe website at adobe.com.)
6. With kits for PC compatibles, refer to
Connecting the STI Modem
to Cell Phones
flyer for information on obtaining a cable for
your cellphone.
7. Refer to
Appendix A
for troubleshooting information for PC
compatible installations.
7. Refer to
Appendix B
for FCC and DOC compliance notices.
8. Refer to
Appendix C
for information on the cellular data
communication technology license.
