Communicator
Page 28
Table 4-1.
AT Command Summary
AT
Command prefix used to begin almost all commands.
Commands preceded by AT and followed by <Enter>:
D
Dial the following number using the default or previous
method (tone or pulse).
DT
Dial the following number using tones.
DP
Dial the following number using pulses.
DS=
n
Dial stored number
n.
W
Wait for dial tone before dialing.
H
Hang up the phone.
O
Go on-line (switch from command mode to data mode).
Used to resume interrupted communications when the
remote modem is still on-line.
S
r
?
Read S-register
r.
S
r
=
n
Write value
n
to S-register
r.
Z
n
Reset and recall saved profile
n.
&F
n
Recall factory configuration
n.
&V
Display current configuration and stored profiles.
&W
n
Save current configuration as profile
n.
&Z
n
=
x
Save
x
as stored telephone number
n.
Command not preceded by AT and not followed by <Enter>:
A/
Repeat the previous command.
