Simpact Freeway 2000, Hardware Installation Manual

Page: 49 / 86

3: Configuring the Boot Parameters using the Local Console
DC 900-1331F 49
Step 2:
When prompted on the console screen, press <return> within 7 seconds to prevent the
autoboot attempt. The Freeway Boot System Main Menu shown in Figure 3–1 appears.
Note
The Freeway Boot System Main Menu is only accessible using the
local console connected to the rear of the Freeway unit. Later you
can access these same functions from any remote console using the
Freeway Interactive Menu as described in the
Freeway User’s
Guide .
Figure 3–1: Freeway Boot System Main Menu
Freeway Boot System Main Menu
-----------------------------
1) System Boot
2) Display Boot Parameters
3) Edit Boot Parameters
Select: