32
DC 900-1331F
Freeway 2000/4000 Hardware Installation Guide
Step 3:
Check that the shipping carton includes the following:
•
Freeway unit
•
Power cord
•
Cable with a 9-pin and a 25-pin connector on each end (if your Freeway has an
MVME 2600 CPU board)
•
Three-headed loopback cable(s), one per Freeway ICP
•
Optional hard or floppy disk drive
•
SCSI II-style high-density termination connector (unless you have a Freeway with
an MVME 162 CPU 8A non-SCSI board)
•
Anti-static strap
•
Freeway 2000/4000 Hardware Installation Guide
(this manual)
•
Freeway User’s Guide
•
Loopback Test Procedures
•
Software distribution media (may be shipped separately along with the applicable
programmer’s guide and other supporting documentation)
Note
You do not have to wear the anti-static strap while connecting
Freeway to the network, but it should be kept with the unit for
future use when you are making upgrades to the system that
require access to the inside of the enclosure.
Save this note:
Match
equipment list
to 1332
preface.
Summary of Contents for Freeway 2000
