Simpact Freeway 1200, Hardware Installation Manual

Page: 46 / 76

46 DC 900-1537B
Freeway 1200/1300 Hardware Installation Guide
Flags
This parameter specifies whether you want Freeway to:
•
Autoboot two seconds after system reset, seven seconds after
system reset, or not at all
•
Display the version numbers of the
.mem
files
•
Force the primary boot network interface to operate at 10
megabits/second, half duplex
Enter the
Flags
value shown in Table 3–2 on page 47 that matches your
configuration requirements. The default
Flags
value is
0
. The
Flags
word is an inclusive “
OR
” of the desired bits for the individual func-
tions.
Freeway Server Name
Enter the system name assigned by the system administrator for this
Freeway.
Freeway Inet Address
Enter the Internet address assigned by the system administrator for
this Freeway in decimal dot notation (for example, 207.67.135.84).
Freeway Subnet Mask
If your Freeway is located on a subnet, enter the subnet mask in hexa-
decimal notation (for example, ffffff00).
Boot Server Name
Enter the name assigned by the system administrator for the boot
server. Optionally, you can clear this field and the software will assign
the default name “
bootserver
.” If you are booting from the local disk,
this parameter is ignored.
Boot Server Inet Address
Enter the Internet address assigned by the system administrator for the
boot server in decimal dot notation (for example, 207.67.135.84). If
you are booting from the local disk, this parameter is ignored
System Boot Directory
If the Freeway boot files will be stored in the home directory of the FTP
(or RSH) user account, clear this field. Otherwise, enter the full path
name of the boot directory. The default UNIX directory is
/usr/local/freeway/boot.
The default VMS directory is
SYS$SYSDEVICE:[FREEWAY.BOOT]
. For Windows NT versions earlier
than 4.0, the default directory is
c:\freeway\boot
. For Windows NT
4.0 or later, use the alias you have set up to point to the
freeway\boot
directory.
To boot from the local disk, set the system boot directory to
// / /ii i idd d dee e e
.
System Boot File Name
Enter the system boot file name for this Freeway. The default is
ff f fww w w44 4 488 8 866 6 6
.
Table 3–1: Freeway System Boot Parameters (Cont’d)
Boot Parameter Description