SimonsVoss SI.SmartHandle AX A0 Manual Download Page 19

Page: 19 / 165

7 Installation

You can programme the SI.SmartHandle AX while it is still in the packaging
(except MP) and then install it.

You will also find information on installing the SI.SmartHandle AX in the
accompanying quick guide.

7.1 Installation instructions



The batteries are already fitted.



Do not touch electronics/components; do not allow them to come into
contact with oil, paint, moisture, alkali or acids.



Keep away from sources of interference, such as power supply units.



You must not strike the product while installing the cylinder.



Attach plan to the door. Do not install while bent or tensioned.



Use the supplied drilling template.



If required, fit the supplied dummy cylinder to comply with approval
requirements for FH variants.



Only undo the indicated screws.

SmartHandle AX

SmartIntego

(Manual)

7. Installation

19 / 165

Summary of Contents for SI.SmartHandle AX A0






































































































































































Search results

Summary of Contents for SI.SmartHandle AX A0

Reviews:

Related manuals for SI.SmartHandle AX A0

Brands by name

Popular brands

SimonsVoss SI.SmartHandle AX A0, Manual

Search results

Summary of Contents for SI.SmartHandle AX A0

Reviews:

Related manuals for SI.SmartHandle AX A0

Brands by name

Popular brands