SimonsVoss SI.SmartHandle AX A0, Manual

Page: 138 / 165

15 Disassembly
You will also find information on disassembly in the supplied quick guides.
15.1 Variant A0 (vertical)
You need the following tools for disassembly:

TX-15 screwdriver

Slotted-head screwdriver

PH-2 screwdriver

1.5 mm hex key
Remove fittings
1. Disassemble electronic cylinders if necessary.
2. Unscrew the headless screws of both handles.
3. If necessary, remove the escutcheon covers with a slotted screwdriver.
4. If necessary, remove the escutcheon covers.
5. If necessary, unscrew the escutcheon bases.
6. Remove the inlay of the inside handle with a slotted screwdriver.
7. Unscrew the screws of the base of the inside handle.
8. Remove the inside handle.
9. Pull out the assembly with the square.
9
SI.SmartHandle AX is removed from the door.
10. Push the locking pin of the square inward and pull the square out of the
assembly.
9
The square is removed.
SmartHandle AX SmartIntego
(Manual)
15. Disassembly
138 / 165