SimonsVoss SI.SmartHandle AX A0, Manual

Page: 52 / 165

Screw/square Length
2× L2 T + 8 mm (± 3 mm)
Spindle T + 37 mm (± 4 mm)
1. Measure the thickness of the door (T).
2. Calculate the screw lengths.
3. Select suitable predetermined breaking points which are no more than
3 mm longer than the calculated length.
4. Separate the predetermined breaking points with the pliers.
9 Screws are trimmed.
NOTE
X-variant
If you have ordered version X for very thick doors, your delivery includes an
extra long square rod and threaded rods together with extension sleeves. In
this case the length specification refers to the total length of the screw (=
screw, extension sleeve and threaded rod).

Proceed as described below.
1. Assemble the screws, the extension sleeves and the threaded rods.
SmartHandle AX SmartIntego
(Manual)
7. Installation
52 / 165