SmartCD Programming Device
Page 3
3
1.0 Safety
notes
•
Avoid exposure to direct sunlight.
•
Keep unit away from sources of magnetic interference.
•
Make sure the unit does not drop onto the floor or receive severe shocks of any
kind.
•
If misused, the lithium batteries installed in the programming unit can pose a risk
of fire or burning. Do not open, burn or heat to over 70°C.
•
Replace the batteries only with storage batteries approved by SimonsVoss
(currently BMZ Li-Ion manganese type US14500V).
•
The integrated batteries must be charged for at least 3 hours before first use.
•
Dispose of exhausted or non-functioning batteries without delay in accordance
with applicable regulations far away from children’s reach.
•
Faultless programming in conjunction with a Windows Mobile 5.x PDA can only be
guaranteed with units approved by SimonsVoss.
•
The manufacturer reserves the right to make technical amendments at any time.
•
In cases of dispute, the original German manual shall take precedence.
2.0 Introduction
The SmartCD is a programming unit specially designed to be used with a PC/laptop
or a Windows Mobile 5.x PDA (Personal Digital Assistant). It allows you to program
and retrieve all digital components in the SimonsVoss 3060 system very easily. You
can also compare personal data (such as addresses, calendars, etc.) with the PDA.
