Operating Instructions for the Palm LDB Version 1.40
7
Version: June 2004
5.
Exporting the Locking Plan to the Palm
Open your locking plan on the PC and
make any changes that are necessary.
Then authorize the locking plan and
transponder programming. Select
File
Export
Palm databases
.
Select
All transponders
or only
particular transponders. If you
would like to have the
transponder descriptions included
in the display when you read out
the access list or transponder list,
you should always activate
All
transponders
. Otherwise, the
read-out display shows only the
ID numbers of the transponders, not their descriptions. Next, select the locking
system and lockings that you want to edit with the Palm.
You can select lockings in one of
the following ways:
1. All
lockings
2. Lockings that need to be
programmed
3. Only particular lockings
Transmit complete list of
authorizations
means that the
complete locking plan will be
exported. This is particularly
important if you want to use the
Palm to make short-term
changes to the authorizations. If
you do not select this option,
only the locking plan changes will be transmitted. Confirm with OK.
