manualshive.com logo in svg

Simons Voss Technologies Palm LDB 1.40, Operating Instructions Manual, Page: 4 / 16

Share
Download
Simons Voss Technologies Palm LDB 1.40 Operating Instructions Manual Download Page 4

Operating Instructions for the Palm LDB Version 1.40

                                                               4                                

Version: June 2004

Do this by touching 

PalmLDB   PalmLDB-Info

 in the menu bar. If an older

software version (< PalmLDB1.40) is installed, please contact your dealer or
SimonsVoss directly.

  Make sure that the LDB that you are using matches the respective

PalmLDB. If an older software version (< LDB1.40) is installed, please
contact your dealer or SimonsVoss directly.

  You can also operate the Palm LDB1.40 in combination with the WaveNet

LDB (1.41).

4. Starting 

Actions

Now you can carry out the following actions:

 

Edit lockings

Program and read out lockings

 

Open the door

Carry out an emergency opening with the help of the password

 

ConfigDevice

Reset and test the programming device

 

Exit

Leave the program

Before you can program and read out the access list and transponder lists,
you must first load the locking plan on to the Palm (see the section "Exporting
the Locking Plan to the Palm").

☺

There is a test system on the SimonsVoss CD. If you would like to
familiarize yourself with this locking system, you must use the Install Tool
to install all six files (PDB format). The test system's file password is 

test

.

Summary of Contents for Palm LDB 1.40

















Reviews:

No comments