manualshive.com logo in svg

Simons Voss Technologies Palm LDB 1.40, Operating Instructions Manual

Share
Download
Simons Voss Technologies Palm LDB 1.40 Operating Instructions Manual Download Page 1

Operating Instructions for the Palm LDB Version 1.40

                                                               1                                

Version: June 2004

Table of Contents

1. General 

Method 

of Operation........................................................................ 2

2. System 

Requirements ................................................................................... 2

3. Installing 

the PalmLDB .................................................................................. 3

4. Starting 

Actions ............................................................................................. 4

5. 

Exporting the Locking Plan to the Palm ...................................................... 7

6. Editing 

Lockings ............................................................................................ 9

7. 

Reimporting Data From the Palm to the PC................................................15

8. 

Checking and Repairing the Database........................................................16

Summary of Contents for Palm LDB 1.40

















Reviews:

No comments

Brands by name

Popular brands

Load more brands