12
Your Simoniz
®
Polisher/Sander is designed
with Random Orbit technology. The tool will
perform better when less pressure is
applied. Applying excessive pressure will
slow down the random motion and reduce
the effectiveness of the tool. This Random
Orbit Technology applies to all functions:
polishing, buffing and sanding.
WARNING:
Always remove the
battery from the tool while changing
accessories.
WASH VEHICLE OR BOAT
Before applying polish (or wax), it is
important to clean and dry all the surfaces
to be polished or waxed.
1. Wash, clean and dry the vehicle or
boat.
2. Remove all road tar, grease spots and
bug stains.
3. Make sure the work area is dry.
APPLYING POLISH
1. At
tach 4” foam applicator pad (1) to
the mounting plate (2) (see Fig. 5).
NOTES:
a) A hook & loop system is used to
attach the polisher accessories to the
mounting plate. To attach the foam
pad, simply place the loop surface of
the pad on the hook surface of the
mounting plate and firmly press it in
place.
b) Make sure the pad is centred on the
mounting plate.
2. Apply a bead of liquid polish to the
foam pad (see Fig. 6).
NOTES:
a) Use only liquid polish. It spreads
more evenly on the working area.
b) Keep from getting polish on the
edge of the foam pad to reduce
splatter.
c) Apply polish to the pad sparingly.
Excess polish will not provide extra
protection. It only makes removal more
difficult.
3. Place polish covered surface of foam
pad on the work surface and turn the
polisher ON by squeezing the trigger
switch (1) (see Fig. 7).
NOTE:
Press and hold lock-on button
then release trigger switch to lock the
switch ON. Press trigger switch again
to turn the polisher OFF (see Page 8).
OPERATION
!
Fig. 5
Fig. 6
