Simonelli MUSICA, Service Manual

Page: 61 / 100

A
Fig . 116
Fig . 117
6.6.1 rePlaceMenT OF THe
FlOaT
1 Take out the water tank and remove the rear
panel.
2 Manually remove the tank float.
Ed. 01 of 12/2015
6.15
Service Manual
6.6
waTer TanK
To access the water tank, remove the rear panel.
NOTE
In case of a prolonged inactivity of the
machine, the tank valve may be blocked
owing to limescale .
To release the tank valve, use a screwdriver to
allow water discharge.
Check the valve for the presence of limescale
and the conditions of seal “A”. Replace the faulty
parts, if necessary.
NOTE
During the assembly phase of the new float,
make sure the “+” mark on the float itself is
oriented towards the tank bottom.