Simonelli MUSICA, Service Manual

Page: 23 / 100

Hot water dose setting
•
Use the relevant procedure to enter the pro-
gramming function.
•
Press the hot water selection key .
•
Hot water delivery will begin.
•
Decide the required amount of hot water and
then press the key again.
•
Press the key to quit the programming
mode.
Standard dose setting
•
It is possible to enter pre-set values for the
group doses and hot water.
To do this, it is necessary to press the key
and hold it down for at least 10 sec-
onds until the flashing keys switch off.
The doses are:
1CN 2CN CONT. WATER
80 cc 120 cc 160 cc 45 sec.
NOTE
Setting a time of 0 seconds for the water causes
it to operate in continuous mode.
Ed. 01 of 12/2015
2.9
Service Manual
Fig . 20
Fig . 21