Simonelli MUSICA, Service Manual

Page: 20 / 100

Make certain that the cup support grill (8) is posi-
tioned squarely and is level.
7 Make sure that the steam knob (2) is closed,
facing down.
8 Make certain that the line voltage corre-
sponds to the requirements indicated on the
label.
9 Only insert the plug in the socket if the steam
knob (2) is closed and the mains voltage is
the correct one.
10 The preliminary operations have been com-
pleted and the machine is ready to be set up.
NOTE
At the start of the day’s activities and in any case,
if there are any pauses of more than 8 hours,
then it is necessary to change 100% of the water
in the circuits, using the relevant dispensers.
NOTE
In case of use where service is continuous, make
the above changes at least once a week.
NOTE
If water level in the tank is not enough or the
pump remains on for more than 90 seconds,
the machine will stop and all keys will blink. By
switching the machine off and on, the filling pro-
cedure of tank will continue until the appropriate
level is reached.
NOTE
In case water is not filled when starting the
machine for the first time:
1 the cause may be an air bubble between the
pump and the tank, which prevents flow of
water.
2 check the tank valve for correct operation.
3 remove and re-install the tank full of water
several times to facilitate air bubble removal.
Ed. 01 of 12/2015
2.6
Service Manual