15
EN
MDX ON DEMAND
4.2
BASIC SAFETY PRECAUTIONS
•
Never touch the machine with damp or wet hands.
• Never use the machine when barefoot.
• Never attempt to unplug the machine by pulling the power cord or the machine itself.
• Do not expose the machine to atmospheric agents (sun rain, etc..).
• Never allow the machine to be used by children or by irresponsible persons.
•
Always use the appliance on a flat, steady surface that is able to support its weight.
• Always unplug the machine from the power supply before performing any cleaning or
maintenance operations.
• Do not use jets of water or detergents for cleaning.
• In the case of machine breakdown or malfunction switch the machine off and do not tam
-
per with it.
• For repairs contact only an authorized service center and request use of original spare
parts.
• Non-observance of the above precautions may make the machine unsafe for future use.
• Do not leave the machine switched on when not in use. Unplug the machine when not in
use.
• Do not obstruct the ventilation and/or heat dissipation openings and/or slits nor introduce
water or any other liquids into same.
• Do not obstruct the ventilation and/or heat dissipation openings and/or slits nor introduce
water or any other liquids into same.
• Never insert spoons, forks or other utensils into the pouring lip
(10)
(see Fig. 1)
, or into
the coffee grain container
(7)
(see Fig.1)
for any reason whatsoever while the appliance
is operating.
• Always switch off the appliance before removing blockages from the pouring lip.
• Never place the appliance in water or other liquids.
• Should a foreign body stop the motor, switch the machine off immediately and contact an
authorized service center.
• Should a foreign body stop the motor, switch the machine off immediately and contact an
authorized service center.
WARNING
Those machines bearing the "EL. MOTOR WITH THERMAL PROTECTION" indication
are equipped with device which protects the motor from overheating.
When this device is engaged, do not attempt to operate the machine: isolate the
machine from the power supply and eliminate the cause of the trouble before re-
starting.
5.
APPLIANCE DESCRIPTION (see Fig.1)
1
LCD Display
2
Decreasing key
3
Luminous key for 1 coffee dose
4
Increasing key
5
Luminous key for 2 coffee dose
6
Container cover
7
Coffee bean container
8
Coffee bean container for opening/closing tab
9
Grinding adjusting knob
10
Dispensing spout
11
Grinding start key
12
Filter holder fork
13
Ignition switch
14
Coffee drip tray
