Simon XTi System Manual
http://alpha.adt.com/help/266[11/14/2018 8:05:18 PM]
1. Call the central station and tell the operator that you will be testing the system.
2. Arm the system.
3. Test an emergency panic icon and trip at least one sensor of each type (fire, intrusion, etc.) to verify
that the appropriate alarms are working correctly. There could be a 30 second delay on intrusion
devices.
4. When you finish testing the system, call the central station to verify that the alarms were received.
Other System Information
Time and Date
If the panel loses both AC and battery power, upon power restoral the system time will reset to midnight
and the date will reset to 1 - 1 - 2000, indicating it has not been set correctly.
Time format is: hour/minute/a.m. or p.m.
Date format is: month/day/year:
To set the time:
1. From the Status & Settings screen, select [Set Date/Time].
2. Enter [master code].
3. From the Set Date/Time screen press the first box to set hour and press [SAVE].
4. Press the second box to set minutes and press [SAVE].
5. Press the a.m/p.m. box to toggle a.m/p.m. setting.
To set the date:
1. From the Set Date/Time screen press the first box in the second row to set month and press [SAVE].
2. Press the second box to set day and press [SAVE].
3. Press the third box and enter the year and press [SAVE].
Volume
Voice Volume
To set the voice volume:
1. From the Status & Settings screen, next to Voice Volume, press the left arrow to lower the voice
volume and the right arrow to raise the voice volume.
2. The bars between the arrows register the volume level. No bars is off. Four bars is loudest.
Beep Volume
