background image

Simon XTi System Manual

http://alpha.adt.com/help/266[11/14/2018 8:05:18 PM]

At this point, you are in the Programming menu. At this level, the following submenus are accessible:

Access Codes
Security
Phone Numbers
Siren Options
System Tests
Interactive Services (Optional. Ask your dealer for more information.)

Access Codes

There are three types of access codes:

Master Code 

The master code is your most powerful code and can be used for all user operations including
programming. The initial value of the master code is 123, 1234, 12345, or 123456, depending on the
installer-programmed access code length.

User Codes 1 to 8 

There are eight user codes, which can be used for many user operations, but not programming or
bypassing sensors. Initially, all user codes are blank. A user code can be deleted by pressing Delete while
the code is being changed.

Duress Code 

The duress code, when used in place of another user code, generates a silent duress alarm that is
reported to the central monitoring station. Initially, the duress code is blank. The duress code can be
deleted by pressing Delete while the code is being changed.

To add/edit access codes:

1.  From the Programming screen, press [ACCESS CODES].
2.  To add or edit an access code, press the white field next to the access code.
3.  Enter the new/edited code on the numbered keypad and press SAVE.
4.  Press [CLOSE] repeatedly to exit menus.

Security

The Security menu contains the Downloader Enable option. This option determines whether your dealer
can access the system remotely.

To program the download enable option:

Summary of Contents for XTi











Reviews: