background image

Simon XTi System Manual

http://alpha.adt.com/help/266[11/14/2018 8:05:18 PM]

Note: The designated door may be opened and closed only once. If you close the designated door behind
you when you exit, you will need to disarm the system upon re-entering. Leave the designated door open
while using the quick exit feature.

Exit Delay Extension

If enabled by your installer, the exit delay extension feature will recognize when you arm the system, leave
your house and then quickly re-enter (for example, if you forget your car keys). If this happens, the system
will restart your exit delay to give you the full exit delay again.

Bypassing Zone

Bypassing a sensor allows you to open the sensor while the system is armed. For example, if your doors
and windows are armed and you want to open your kitchen window, but do not want to disarm the entire
system, you can bypass the kitchen window sensor and then open the kitchen window without causing an
alarm. Bypassed sensors are automatically unbypassed when the arming level is changed to a level where
the sensor is not active.

To bypass, or unbypass, a sensor:

1.  Press [SETTINGS ICON].
2.  Press [SELECT].
3.  Enter your [master code].
4.  Next to the sensor name, select [BYPASSED] to bypass the selected sensor, or to not bypass the

selected sensor. 

Chimes

Use the chime feature to signal when a protected door is opened while the system is disarmed. The panel
chimes twice when a chime sensor is tripped, if the chime mode is enabled. This feature allows you to be
notified when family members are going in and out of your home. The chime and special chime features
are turned on or off in the System menu

Note: If there are no chime sensors in your system, the chime option will not appear in the System menu. 

To enable or disable the chime feature:

1.  Enter the Status & Settings menu and scroll to the Chime option.
2.  Press [On] or [Off] to modify the setting (a gold icon indicates the option is selected).
3.  Press [Close] to exit the Status & Settings menu.

Note: This menu option will not appear if chime sensors are not in your system.

Summary of Contents for XTi











Reviews: