Simon XTi System Manual
http://alpha.adt.com/help/266[11/14/2018 8:05:18 PM]
1. Press [PRESS TO DISARM].
2. Enter your [security code] when the keypad screen appears.
Exit/Entry Delay
Your Simon XTi provides a delay after entering or exiting your home before the system is armed or
disarmed.
Silent Exit
The silent exit feature silences the status beeps that accompany the exit delay. Press [ON] next to Silent
exit (Figure 3 on page 8) before pressing the arming level icon to silence status beeps. The panel will still
beep at the beginning and end of the exit delay.
Note: Enabling silent exit doubles the exit delay time.
No Entry Delay
Use the no entry delay feature when you are staying at home, or when you are away from home and will
carry a wireless keyfob to disarm the system before opening a protected door. Check with your installer
to find out how this option is programmed.
To set up no entry delay:
1. Close all door and windows.
2. Press [Press to Arm].
3. Press the [OFF] next to Entry Delay (see Figure 3 on page 8).
4. Press your desired arming level. The arming countdown begins. The screen displays (clock with a
red strike through) with your arming level and speaks Doors and Windows On, No Entry Delay.
Note: To avoid causing an alarm, you must disarm the system with a wireless keyfob before entering your
home.
Quick Exit
Use the quick exit feature when you want to briefly leave the house while the system is stilled armed (for
instance to get the newspaper). This feature must be enabled by your installer.
To enable Quick Exit:
1. Press [PRESS TO DISARM].
2. Press on the touch screen. This allows a designated exit door to be open for up to 2 minutes
without triggering an alarm.