Simoco Xfin Blade, Service Manual

Page: 67 / 76

XFIN-BLADE-SM
PROGRAMMER GUIDE
PAGE 67
9 PROGRAMMER GUIDE
9.1 G
ETTING
S
TARTED
Ensure that the PC is connected to the Xfin Blade Management Terminal via a CAT 5
Ethernet cable or a RS232 Serial cable. This provides the communications link between
the Xfin Blade Management Terminal and the Xfin Blade.
9.1.1 Main Screen
The main menu by default displays clickable buttons of several configurable areas. Some
areas will be hidden depending on whether the Xfin Blade Management Terminal is in
Single Site or Multi Site. The areas are:
•
Switch
•
Site Configuration
•
Xfin Blades
•
Channels
•
Channel Lists
•
PABX/PSTN
•
Operating Parameters
•
Fleets
•
Subscribers
•
Access Levels
•
Diversions
•
White List
•
Timers
•
Time Schedule
•
External Alarms
•
Queue Depths
•
VOX
9.2 D
ATABASE
The Xfin Blade Management Terminal requires a database to be created to store raw
data. This data can then used to configure an Xfin Blade. When configuring the Xfin Blade
data is taken from the database and sent to the Xfin Blade. Data that the Xfin Blade
Management Terminal receives from the Xfin Blade is also stored within the database.
9.2.1 Creating a New Database
Located across the top of the Main Menu form there is a menu bar. To create the new
database click on Database tab, then select New from the drop down. A window will