During the Man Down “initialisation period”, the screen displays the three measured
axis (left-right, up-down and front-back) of acceleration of the radio.
During this “initialisation period”, it is important that the radio be held in the position
that it will normally be worn in order to “train” the radio with its normal orientation.
Consequently, any significant deviation from this remembered orientation will be
sensed. The display should read 0, 0, 0 when in its trained position.
7.15.4. GPS
The GPS screen displays the GPS co-ordinates (Latitude and Longitude) for the
location of the radio. It also shows the age (time) since the GPS fix was obtained.
Figure 42: Radio Status Menu – GPS Screen.
7.16. SCAN MENU
The Scan menu allows the User to manually start and stop the channel scanning
process on the current channel, if the channel is programmed as a “scan” channel in
the FPP.
This Scan function can also be programmed to a toggle key.
Figure 43: Scan Menu.
Use the
▼
and
▲
keys to select either the Scan On or Scan Off function. Press the
‘Select’ key initiate the action.
Doc Number:
TNM-U-E-0114 ISSUE 1.4
Page
66